To create its powerful performance to more motorists, the MINI-Z AWD happens to be for sale in a Readyset. The MA-020 framework features VCS (variable camber suspension system system) inside the front side that optimizes camber modification with suspension system move and a specially developed circuit board. The framework design allows area for establishing the optional gyro unit(provided separately). The gyro may be modified by switching a little volume regarding framework to mirror the number of steering modification in a reaction to alterations in framework position, allowing novices to specialists to push because of their complete potential. Completely fitted out with accuracy ball bearings, the high drive effectiveness concerning the MA-020 framework is complimented to the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that basically requires no regularity musical company environment; all at outstanding value cost. Simply set the batteries to relish the excitement of drift driving with the included number of drift tires. The framework works with with many ASC MINI-Z figures (additional elements maybe required for some one designs). The MINI-Z AWD guarantees a unique world of dramatic battle action for you to experience and luxuriate in.
●MINI-Z AWD Readyset considering MA-020 framework.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitiveness modification function.
●Drift tires are setup as standard.
●Readyset calls for simply batteries become prepared to put it to use!
●Features 2.4GHz Syncro KT-531P transmitter that basically requires no setup of regularity bands.
●Factory finished human anatomy includes display model quality finish.
●Features VCS (variable camber suspension system system) that adjusts camber according to suspension system system system stroke.
●Coil springtime on front suspension system system is just changed without tools.
●wide selection of optional elements can be acquired to be installed.
●Note) Optional ICS can not be used. In addition, this model is particularly designed for the KT-531P transmitter. It is not befitting the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is simply suitable for the unique gyro product (offered individually).
In 1998, Subaru produced 400 products about the restricted version 22B-STi to commemorate its three consecutive WRC (World Rally Championship) victories knew the ultimate 12 months. Despite being a road car, the restricted variation have been made inside image linked to WRC vehicle with features including front side and rear blister fenders and big rear wing.
Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim including double cost adjustment of steering angle and control the blinking price of optional LEDs. Furthermore, the transmitter has a workout Mode function which limits rate in regards to the vehicle for effortless learning (standard environment before shipment is knowledge Mode).
Distinctive AWD Sports framework will depend on the MA-02 framework and features the RA45 product.
Features VCS front suspension that optimizes camber improvement together with suspension system system system move. Replacement of front suspension system system coil springs is simple without tools required.
Designed with strut-type back suspension system.
Full bearing needs have 14 ball bearings.
Made with drift tires as standard.
Beautifully made with unique mount room and gyro modification amount the optional gyro device (provided separately).
TECHNICAL INFORMATION
- Length 161.0mm
- Width 70.0mm
- Height 51.5mm
- Wheelbase 90.0mm(M)
- Tread F : 58.5mm R : 58.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.0mm
- Rear Wheel Offset Narrow +1.0mm
- R/C System Syncro KT-531P
- Weight 170g
KIT CONTENT
- R / C unit integral complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion elimination tool
REQUIREMENT TO WORK
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
