Kyosho 34362 - 1/10 Scale Radio Controlled Electric Powered 2WD Truck 2RSA SERIES Outlaw Rampage PRO  [KY-34362]

Embodying the defining mechanics of a genuine manufacturing model trophy automobile, the scale 2WD Outlaw Rampage is mostly about 80percent pre-assembled in an ARR kit, including the optional upgrade elements that mark the product as a “PRO” version. While power and steering control is harder than a 4WD model, the superior running protection and basic functionality of the backside wheel 2WD is recognized from roll cage, long swing aluminum oil shocks, stabilizers on front side and straight back with 3 different cable measure settings, and aluminum skid pads that protect the framework. With effortless controllability and wider range for environment alterations, the particular powerful performance of 2WD automobile race is in hands.

●ARR Kit 's very nearly entirely pre-assembled and includes performance-enhancing optional components as standard.
●Full ball bearing requirements (20 bearings) confirm smooth movement with reduced drive loss.
●3-piece front bumper protects the framework from difficult crash harm.
●Front double-wishbone suspension system system system with longer sus arms understands exceptional driving security and traction.
●Rear suspension system system is because of this rigid axle differential to produce smooth motion and superior traction control.
●Gearbox features 32-pitch module countertop gear and diff gear. Reinforcement of both gears and big modules realizes increased energy (spur gear is 48-pitch).
●Lever lock owner enables effortless removal of battery pack.
●Connector holder enables connector towards radio plate become removed with one hand.
●Hex screws are used throughout for effortless upkeep.
●Pre-cut clear scale body recreates 1970-80’s trophy car style.
●Choose either square or circular headlights along with the two front grill designs included.
●Compatible with Light-emitting Diode light item (No. 97054-2: two lights, 97054-4: four lights) for effortless installation.

Real roll cage with two free tires not just provides scale look but in addition provides structural and developing functionality. Changing from horizontally set up tires to at least one vertically mounted and changing the space can modify the excess fat security for adjustment of right back traction traits.

Mounting several tires also changing the longitudinal size considerably influences back hold. These elements perform a practical component in boosting driving security.

TECHNICAL DATA

• Length 561mm
• Width 262mm(with human anatomy)
• Height 231mm(with body)
• Wheelbase 335mm
• Tread (F/R) 204mm/204mm
• Tires (F/R interchangeable) φ108×38mm
• Gear Ratio 12.65:1
• Weight 2600g (approx.)

KIT CONTENT

• Approximately 80percent pre-assembled ARR kit
• Pre-cut clear body
• Decals
• Hex wrench
• Cross wrench
• Shock oil

REQUIREMENT TO RUN

• 2ch 1 servo R/C system for cars
• 540 system motor
• ESC ideal for motor
• Battery for chassis
• Battery charger
• Paint for (polycarbonate) body
• Batteries for transmitter
• Tools