KO Propo 40051 - VFS-1 BMC Brushless Motor Controller 1.5  [KO-40051]

VFS-1 BMC v1.5 #40051
variation 1.5 connected with BMC shows it self on ROAR Carpet Nationals with 3 TQ jobs and two victories inside's first outting. Five new preset programs now you can adjust the drag braking system through setup switch in 10per cent increments (OFF-50per cent). All specs are the exact same when the original 1.0 variation, but you'll be capable apply through the inventory motor supervisor for increased rates.

All v1.5 now contain the added ROAR Spec function to conform to the NO timing program. The switch LED will flash at basic to point that 0 timing ended up being set towards ESC.

Specs:

The VFS-1 BMC makes use of KO PROPO's patented VFS technology.
Five preprogrammed settings
Overheat & current Overload protection ready
engine limitation: 4.5T (with heat sink and fan installed, 2.5T)
Size: 33.4 x 37.0 x 16.8 (mm) bodyweight: 30.8g
Max Peak Active: 3120A (FET Specs)
Max Continuous Active: 780A (FET Requirements)

VFS technology lets you definitely plan and fine tune:
Drive frequencies (2KHz~12.0KHz) for 32 throttle actions to get more control/efficiency
braking system regularity (500Hz~2.5kHz) 64 settings
Drag Brake (off~255 action modification)
Three battery power settings [NiMh (4C), NiMh (5,6C), LiPo(2S)]
For setting support simply click below.