Tamiya 58268 - 1/20 RC Mammoth Dump Truck
This is the Tamiya 1/20th Scale electric, radio control Mammoth Dump Truck.
This durable kit is founded on the earthshaking mammoth dump vehicles utilized in major mining alongside high quality jobs.
FEATURES:
Effective shaft driven 4WD.
Two engines; one 540 size to push the tires; one smaller motor with worm gear shaft for dump human anatomy operation.
Kit uses two channel radio for all functions, to improve bed end vehicle and steer ideal for more than one second, return steering
to basic to eliminate increasing, steer kept for bringing down. No significance of expensive three channel radios.
Fully practical dump human anatomy holds up to 8.8 lbs (4kg) of product for dumping.
Durable die-cast gears housed appropriate ahead and back sealed gearboxes.
Four wheel suspension system equipped with coil and leaf spring shock units.
Durable Juggernaut 2 Monster Truck chassis.
Cab and dump human anatomy are molded in shock resistant plastic.
6-1/8" (156mm) diameter 2-3/8" (60mm) wide rubber tread tires pre- set up on artificial steel finish tires.
INCLUDES:
One 1/20th Scale Electrical broadcast Control Mammoth Dump Truck with electronic rate control with Futaba J receiver plugs and Standard battery pack connectors, 6-1/8" (156mm) x 2-3/8" (60mm) rubber tread tires pre-mounted on plastic steel finish tires, one tube thread locking element, one 4-way wrench, two pipes of grease, synthetic ties, flat blade screwdriver, body pins, twin sided tape, two hex wrenches.
NEEDS:
Radio: 2 channel pistol grip with two servos.
Battery: 7.2v flat stick pack.
Tools: big and small blade phillips screwdrivers, tweezers, modeling blade, long nose pliers, part cutters, scissors, pin vise
and synthetic tangible.
SPECS: Length: 20-5/8" (525mm)
Width: 11-5/8" (295mm)
Height: 11-13/16" (300mm)
Weight: 12.2 pounds (5.5kg)
FEEDBACK:
For replacement bearings utilize:
1- 5x8 Gear Assembly
3- 5x11 Gear Assembly
1- 5x8 countertop Gearbox
1- 5X11 countertop Gearbox
1- 6x12 Driveshafts
2- 6x12 Front Uprights
2- 6x12 backside Uprights
2- 3x7 Rack Gearbox
1- 5x8 Rack Gearbox
1- Tamiya MV1 4mm flanged steel bearing Rack Gearbox
2- Tamiya MV1 4mm flanged metal bearing L & R Rack Case Assem.
1- 5x8 L & R Rack Case Assembly
