Tamiya 58294 - 1/10 R/C High Performance F201 w/Original  [58294]

This is the 1/10 Scale Electric Powered, Radio Controlled, 4 Wheel Drive
Tamiya F201 Chassis On-Road car Kit.

CHARACTERISTICS:

Chassis: Monocoque synthetic F201 kind.
Drive: Four wheel shaft drive.
Motor: RS 540 sport tuned.
Ball Bearings: Complete set included.
Shocks: Oil-filled artificial bodied.
Gearbox: Closed front side and rear.
Differentials: Planetary gear.
Transmission: Single-speed.
Tires: 1.18" (30mm) tread width, 2.4" (62mm) external diameter, 1.5"
(38mm) internal diameter plastic treaded.
Wheels: 1" (25.5mm) width, 1.6" (40mm) interior diameter grey plastic
spoke.
Speed Control: included, utilize electronic type for some easily useful performance.
Bumpers: Front and rear black plastic.
Suspension: Adjustable.
Camber Tie Rods: Adjustable. Camber could be the angle where in fact the tires
sit vertically.
Steering Tie Rods: Adjustable. Caster/Toe-in pertains to the angle
that the tires aim inward as seen from above.
Steering: Bell-crank type.
Servo Saver: Included.
Body: One clear and something Lexan Carbon Fiber Pattern human body with black
plastic rear spoiler.

INCLUDES: One Tamiya F201 Chassis with oil-filled shocks, 540 stock motor,
one clear and another polycarbonate patterned body, treaded rubber
tires, foam inserts, plastic mesh tires, guidelines, antenna
tube, decal sheet, hardware, one driver helmet for each human body,
20 enamel steel pinion gear, 55 enamel synthetic spur gear, surprise oil.

NEEDS: broadcast: 2-Channel with one servo.
Radio Batteries: (8) AA size
Speed Control: Electronic.
Battery: 6-cell flat with standard connector, 7 mobile won't fit.
Charger: AC/DC timed or top for 6-cell battery
Paint: Spray or brush-on for polycarbonate plastic bodies.
Misc. Goods: Building and track gear

SPECS: VEHICLE-
Length: 16.7" (425mm)
Width: 7.7" (196mm)
Height: 3.3" (100mm)
fat: 3.3 lbs (1480g)(approx.)
Wheelbase: 11.2" (280mm)
Gear Ratio: 2.75:1
Tires- Front and back: 1.18" (30mm) tread width, 2.4" (62mm) outer
diameter, 1.5 (38mm) inner diameter rubber treaded.
BODY-
Length: 14.5" (368mm)
Width: 6.25" (159mm) at cockpit (widest point)
1.25" (32mm) at from tires (thinnest point)
Height: 3.34" (85mm)

FEEDBACK: For Replacement Ball Bearings usage:
Qty. Size Location Bearing Set Qty.
(4) 10 x 15mm Ball Diffs
(4) 8 x 5mm Ball Diffs
(2) 8 x 12mm Gearbox
(1) 5 x 11mm Gearbox
(1) 5 x 10mm Gearbox
(2) 10 x 15mm Rear Uprights
(2) 8 x 5mm Steering Arms
(2) 10 x 15mm Front Uprights
(2) 5 x 11mm Drive Shaft
(1) 5 x 10mm Drive Shaft
(1) 5 x 8mm Drive Shaft
(4) 6 x 12mm tires