Futaba 6EXAP 6-Channel FM 40MHz/ R156F [6EXAP_c3]

Price:

£91.35

Brand:

Futaba

Model:

6EXAP_c3

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder dual rate switch - utilize this modification to flip between two aileron, elevator and rudder control throw settings. The tosses might be setup nonetheless choose, but generally, after the switch is up the throws are greater (high rate) so when the switch is down the throws are less (low priced). This switch moreover flips between exponential costs (if utilized).
Flap control dial/Channel 6 - This dial runs the servo associated with channel 6 into the receiver in case the model has flaps this is actually the control useful to utilize them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to go the basic or center host to every single servo as labeled inside the diagram.
Charging you jack - Port for recharging the transmitter batteries along with the included battery power charger.
On-off switch
INFORMATION INPUT lever - constantly exchange the values of varied functions exhibited concerning the LCD screen.
Liquid-crystal display (LCD) - shows development modes and values entered.
MODE key - accustomed scroll through and display the ten or eleven(PCM) different functions.
PICK key - accustomed show the values the current function.
Throttle-cut key - to work well with the throttle-cut function, lower the throttle stick entirely, then drive the throttle-cut key to totally shut the carburetor and shut of motor.
Throttle/rudder control stick - runs the servos mounted on channel 3 (throttle) and channel 4 (rudder) into the receiver.
Trainer switch - operates the trainer functions. To work well with as a trainer switch the transmitter must be connected to another transmitter via. a trainer cable (available separately).
Retractable landing gear switch/Channel 5 - modification operates the servo attached to channel 5 in receiver should your model has retractable landing gear here is the control frequently expand and retract the gear.
Antenna - Radiates signals towards receiver. Don't ever travel a model without totally expanding the antenna or you may produce disturbance along with other modelers and decrease operational indication number of the transmitter. The antenna could possibly be eliminated and changed with another whenever it is inadvertently broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R156F Receiver
change Harness
Handbook

SPECS:
Transmitter
T6EXAP Transmitter with programmable mixing and 6-model memory.
Transmitting on 40 / 72 MHz musical business.
Operating-system: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
energy: 9.6V NT8S600B Ni-Cd battery pack or 12V alkaline battery
Current drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel FM 40MHz/ R156F [6EXAP_c3]