Futaba 6EXAP 6-Channel PCM 35Mhz/ R136HP/ 4xS3003 [6EXAP_c7]

Price:

£150.14

Brand:

Futaba

Model:

6EXAP_c7

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder dual price switch - use this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses is create however choose, but broadly speaking, whenever switch is ��up�� the throws are greater (��high rate��) the moment the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential prices (if used).
Flap control dial/Channel 6 - This dial operates the servo mounted on channel 6 towards receiver if your model has flaps this is actually the control used to run them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to go the fundamental or center host to every servo as labeled in the diagram.
Recharging jack - Port for recharging the transmitter batteries aided by the included battery power charger.
On-off switch
INFORMATION INPUT lever - accustomed replace the values associated with different functions shown towards LCD display screen.
Liquid-crystal display (LCD) - shows development modes and values joined up with.
MODE key - constantly scroll through and show the ten or eleven(PCM) various functions.
PICK key - constantly expose the values today's function.
Throttle-cut key - to work well with the throttle-cut function, lower the throttle stick completely, then drive the throttle-cut key to totally shut the carburetor and shut of motor.
Throttle/rudder control stick - runs the servos attached to channel 3 (throttle) and channel 4 (rudder) within the receiver.
Trainer switch - Operates the trainer functions. For outcomes as a trainer switch the transmitter must be connected to another transmitter via. a trainer cable (available separately).
Retractable landing gear switch/Channel 5 - Switch operates the servo connected to channel 5 inside receiver in the case your model has retractable landing gear here is the control constantly expand and retract the apparatus.
Antenna - Radiates signals on receiver. Don't ever travel a model without completely expanding the antenna or possibly you may create disturbance to numerous other modelers and decrease functional alert array of the transmitter. The antenna could be removed and changed with another in the event its inadvertently broken.

Hot Brands

Futaba 6EXAP 6-Channel PCM 35Mhz/ R136HP/ 4xS3003 [6EXAP_c7]