Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]

Price:

£100.89

Brand:

Futaba

Model:

6EXAP_c4

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin price switch - take advantage of this modification to flip between two aileron, elevator and rudder control throw settings. The throws could be create however you decide on, but generally, in the event that switch is up the throws are greater (advanced) when the switch is down the throws are less (low cost). This switch additionally flips between exponential prices (if utilized).
Flap control dial/Channel 6 - This dial runs the servo mounted on channel 6 in the receiver if the model has flaps this is the control useful to work them.Aileron/elevator control stick -Mounting point for optional neck band.
Trim levers (all) -Used to move the basic or center position of each and every servo as labeled into the diagram.
Recharging jack - Port for recharging the transmitter batteries as a result of the included battery pack charger.
On-off switch
DATA INPUT lever - frequently change the values concerning the various functions exhibited concerning the LCD display screen.
Liquid-crystal screen (LCD) - shows development modes and values entered.
MODE key - frequently scroll through and show the ten or eleven(PCM) different functions.
PICK key - constantly expose the values the existing function.
Throttle-cut switch - To use the throttle-cut function, reduced the throttle stick totally, then drive the throttle-cut key to completely shut the carburetor and shut linked to the motor.
Throttle/rudder control stick - operates the servos attached with channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - operates the trainer functions. To utilize as a trainer switch the transmitter has to be attached with another transmitter via. a trainer cable (available independently).
Retractable landing gear switch/Channel 5 - modification runs the servo connected to channel 5 in receiver should your model has retractable landing gear here is the control usually stretch and retract the apparatus.
Antenna - Radiates signals on receiver. Never ever travel a model without completely expanding the antenna or simply just you might create interference to numerous other modelers and decrease functional indicator selection of the transmitter. The antenna might removed and changed with another in case it's unintentionally broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R146IP Receiver
Change Harness
handbook

SPECS:
Transmitter
T6EXAP Transmitter with programmable blending and 6-model memory.
Transmitting on 40 / 72 MHz musical organization.
Os: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
energy: 9.6V NT8S600B Ni-Cd battery or 12V alkaline battery
present drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]