Futaba 6EXAP 6-Channel PCM 72Mhz/ R146IP [6EXAP_c11]

Price:

£100.89

Brand:

Futaba

Model:

6EXAP_c11

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

FEATURES:

Aileron, Elevator and Rudder twin expense switch - employ this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are generate nonetheless choose, but generally, as soon as the switch is ��up�� the throws are greater (��high rate��) whenever switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential prices (if used).
Flap control dial/Channel 6 - This dial runs the servo attached with channel 6 in the receiver in the event the model has flaps this is actually the control used to operate them.Aileron/elevator control stick -Mounting point for optional throat band.
Trim levers (all) -Used to go the essential or center place of every servo as labeled to the diagram.
Charging you jack - Port for billing you the transmitter batteries with all the current included battery pack charger.
On-off switch
DATA INPUT lever - constantly replace the values regarding the various functions presented towards LCD display screen.
Liquid-crystal display (LCD) - shows development modes and values joined up with.
MODE key - frequently scroll through and show the ten or eleven(PCM) different functions.
PICK key - accustomed show the values the current function.
Throttle-cut switch - to utilize the throttle-cut function, reduced the throttle stick totally, then drive the throttle-cut key to fully shut the carburetor and shut about the engine.
Throttle/rudder control stick - operates the servos mounted on channel 3 (throttle) and channel 4 (rudder) in receiver.
Trainer switch - operates the trainer functions. To make use of as a trainer switch the transmitter should really be mounted on another transmitter via. a trainer cable (available independently).
Retractable landing gear switch/Channel 5 - Switch runs the servo mounted on channel 5 to the receiver if your model has retractable landing gear this is actually the control accustomed expand and retract kit.
Antenna - Radiates signals towards receiver. Never travel a model without completely expanding the antenna or maybe you might perhaps produce interruption to many other modelers and decrease practical indication selection of the transmitter. The antenna may be eradicated and changed with another in the event it's inadvertently broken.

Hot Brands

Futaba 6EXAP 6-Channel PCM 72Mhz/ R146IP [6EXAP_c11]