TRAXXAS Compatible Steering Link Upgrade ER160 by GPM  [ER160]

Aluminium tie rods with anti-clockwise thread adjustment

The ER160 replacement kit upgrades the fragile factory steering rods on 1/10 TRAXXAS machines to stiffer aluminium links, intended for routine tuning and maintenance. The pack includes eight tie rods and the necessary hardware for plug-in replacement on compatible 1/10 E-Revo, Summit, Revo and E-Revo 3.3 models for both electric and nitro applications.

These rods use a 4mm thread and accept both clockwise and anti-clockwise adjustment so you can alter linkage length without removing the rod from the assembly. Compared with the thinner original parts, the beefed-up cross section reduces flex and helps preserve steering geometry under heavier loads.

Installation is straightforward for experienced hobbyists: remove the stock items, fit the aluminium rods and secure with the supplied screws. Only common hex drivers are required, and the range of colour options helps match vehicle finishes or mark parts during setup.

As a direct-fit option for worn steering links or for drivers seeking reduced front-end flex, the ER160 aluminium rods keep stock geometry while increasing linkage stiffness. Always recheck wheel alignment and steering trim after fitting to ensure predictable handling.