Serpent SER600039-B Serpent Cobra E-Truggy RTR Blue [SER600039-B]

Price:

£291.07

Brand:

Serpent

Model:

SER600039-B

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category

Write a review

Description

Introduction

The Serpent Cobra E-Truggy in RTR trim is a perfect basher sort vehicle that'll simply take numerous beating and its in addition a good package to begin with genuine race ! In line with the Cobra E-Truggy it is the outright price, great management, dependability, rigidness and durability you might need.

The RTR package is actually dialed:
- factory develop racing framework
- prepainted and precut low type truggy body and big composite back wing
- premounted truggy tyres/wheels/inserts
- pre-set 4S waterproof 150A speedo ( DragonRC)
- 2000kv brushless longbody engine (DragonRC)
- electronic 2.4ghz transmitter (DragonRC)
- metal gear servo 16kg ( DragonRC-Savox)
- 3 oilfilled geardifferentials
- Big bore shocks with synthetic dustboots and machined aluminium shocktowers
- Spring metal transmission elements and turnbuckles, front side and rear cvd driveshafts
- Front and back anti-roll bars
- big battery-cases with effortless felcron straps
- Machined aluminium chassisplate
- totally ballraced
- Batteries the car and transmitter aren't included

The bodyshell will come in orange, red, green, blue and red, and a certain sort.

Serpent provides many optional components as a result vehicle to enhance performance, lighter if not for additionally nicer appears.
Available in 4 colors:
600039-O Serpent Cobra E-Truggy RTR orange
600039-R Serpent Cobra E-Truggy RTR red
600039-B Serpent Cobra E-Truggy RTR blue
600039-G Serpent Cobra E-Truggy RTR green
Main features

vehicle
entirely expert pre produce and pre-set framework and gadgets.

Transmitter
DragonRc 2.4 GHz steeringwheel kind transmitter with lots settings and good range. Comes with little and light receiver.

Speedo
DragonRC waterproof speedcontroller with a massive 150A capacity to handle the brushless engine and 4S battery power

engine
DragonRC longbody 2000kV brushless motor with effortless colorcoded connectors

Body
Prepainted and pre-cut low e-Truggy human body, in 4 primary colors orange, red, Green and Blue. ( additionally clear one available as optional)

Tyres
Premounted battle prepared tyres / tires with soft substances and pintype profile for incredible hold.

Chassis
extremely slim 3mm 7075T6 aluminium framework, with machining in the top face to make it lighter in strategic places and also to get a handle on flex. Kick-up front side for appropriate landings. Angled part to increase cornering approval, and protected and simple mounting side guards with 5 screws. Countersunk holes, pouches to position the suspension system brackets. Broadly speaking the Truggy is built to keep carefully the fat really main and nearby the centerline that one may, to produce an incredible general balance.

Side guards / battery pack trays
Durable shaped composite side guards / battery power trays that stay glued to the kind of the framework, and mount with 5 screws each side. Front and sides sufficient to keep the dirt straight down. The guards/trays create lots of protection. The batteries are set up in longtudinal fashion, maintaining the extra weight suprisingly low in automobile. The battery power trays features user-friendly Serpent marked felcron TM straps to secure the batteries in position. Fits 2S and 3S batteries.

Motormount:
The engine is invest numerous optimal destination inside automobile, keeping motor-forces and transmission elements / alignment at heart. Simply one-screw is needed to secure the BL motor, on nicely produced durable machined aluminium motormount. Region for additional motor-cooling available as required. The room the motor allows mounting all popular buggy and (monster)truggy engines.

Composite framework braces
Allows the framework to flex which assists improve bump administration. Front and right back.

Front bumper
well curved front bumper, the same as concerning the Cobra buggy, to shield the best anti-roll club, suspension system brackets, and moves inline with kick-up framework front part for safe landings.

Front suspension system system system
lengthy and durable composite reduced wishbones, along with top spring-steel trackrods. 2 reduced shock-mount jobs. Downstops may be employed as needed. Pivotball kind anti-roll club rods.
.
Front steering / servo saver / angled
Revolutionary angled front side steering installation to reduce the angle of difference in the middle of your total caster and steering airplane. Therefore you ought to have less bump steer and a truer steering Ackerman through the complete array of suspension.

Adjustable springtime packed servo-saver system with interchangeable Ackermann meals. Combined with design regarding steering bell cranks whenever changing the Ackerman you won't should adjust your steering tie rods. You simply will simply have to adjust your end points on your own radio.. a piece of cake to get involved with and set-up.

The Inboard Bell crank keeps the lever and linkage inside car. It can benefit along with the avoidance of dilemmas the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking effect created by your steering knuckle offset. It offers an even more direct fell while maintaining the cars framework more level while turning.

the leading roll center are changed quickly by going the steering knuckle shims using appropriate places.

Topped of with a good composite top-plate.

Front steering-block / c-hubs
incredibly durable front part steeringblock / C-hub installation .

Drive-shafts
much longer and lightweight springtime metal products with pressed in steel pins, laser-engraved. Exact same size front side and rear.

Wheel-axles / wheel-nut
Serpent springtime steel threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to help keep the massive truggy wheels/tyres on program.

Captured universal bones
Guarantees you can complete a race without loosing a pin or set screw. All elements, axles and drive train elements have capture pins

Front shocktower
Light, strong and durable machined 5mm aluminium services and products with 5 jobs for shockangle.

Shock-set front component and straight back
16mm big bore shocks, with hard anodized precision threaded shock-bodies. Shockboots in silicone synthetic to hold the dirt away . Chromed shock-shafts for supersmooth shockaction . The larger o bands provide less basic anxiety and a greater seal without dragging inside shock shaft.

Suspension brackets
The hinge-pins / hingepin balls are captured in durable composite suspension system system system brackets . These capture the nylon roll-center inserts.

Anti-roll club / anti-roll club linkage with pivotball
The anti-roll pubs front and straight back are made of good unique springtime steel, and they are captured inside diff-cased in ballbearing for perfect guidance and control.

Receiver package / servo mount / speedo mount
Composite one piece radiobox to firmly install servoï¿½ s, speedo and receiver. For optimum security the light receiver fits the top-case effortless, with a little opening to allow cable to protrude. The speedo seats suprisingly low on a plate just over the framework, for that reason quick cables lets you the motor. The servo is set up in a vertical fashion.

Central diff
Optimised primary gear-diff with 50T super-hard spur-gear . Smaller, compact design to lessen rotating mass towards the maximum.

Transmission shafts
Durable but light and slim Serpent springtime metal, laser etched shafts.

Front and right back diff
Optimised gear-diff with superhard spur-gears . Smaller, compact design to minimize rotating mass towards max. Same variation front part and right back. Diff coupler in springtime steel seated in large barings for durability.

straight back shocktower
Light, strong and durable machined 5mm aluminum item with 5 functions for shockangle.

Rear uprights
Durable composite back uprights with 3 camber functions

Suspension brackets right back
Durable composite products with eccentric inserts to alter set-up.

back wing mount
The composite back wing mount, enables to improve the angle linked to back wing.

Back wing
Two period high down force wing, has two samples of angle, that also includes 2 fins. Helps improve down force and right line capability

Bodymounts
Nylon bodymounts with wider sitting your body, firmly fastened on shocktowers.

Super minimal profile e-Truck Body
Enhances appearance additionally keeps the profile minimum. Comes precut and prepainted.

Decals
placed on the body.

Oils / oil
vehicle is develop with a high quality silicone oils the diffs and shocks and black colored colored oil. Threadlock used in which required.

Handbook
color manual showing the car, specifications, tips and exploded views. The transmitter and speedo have little split manuals included.

Box
color protective package to re-use for car transport or tyres.

Hot Brands

Serpent SER600039-B Serpent Cobra E-Truggy RTR Blue [SER600039-B]